Config ID 1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
Getting Started
  1. Verify your Apprise API Status:

  2. The following is your Apprise Configuration ID: 

    1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
    For some examples on how to build a development environment around this: click here.

  3. In the future you can return to this configuration screen at any time by placing the following into your browser: 
    https://apprise.simonserver.lat/cfg/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
  4. Use the settings Configuration section to prepare and save your Apprise configuration.
    lightbulb_outlineYou can always refer to the build Apprise URL Builder if you're having troubles assembling your URL(s).
  5. Use the web Review section to review what was parsed/detected from your defined configuration.
  6. Use the announcement Notifications section to test out your saved configuration.
    lightbulb_outline: The number also provided in the announcement Notifications tab identifies how many notifications will be sent (based on tags/configuration provided) when using this section.
Working Remotely With Your Configuration
Using The Apprise CLI

The following command would cause apprise to directly notify all of your services: 

apprise --body="Test Message" \

                   apprises://apprise.simonserver.lat/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727/?tags=all
Send one or more attachments like this: 
apprise --body="Test Message" \

                   apprises://apprise.simonserver.lat/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727/?tags=all \

                   --attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png

                   --attach=/path/to/an/attachment.jpeg

The following command would cause apprise to retrieve the configuration loaded and send a test notification to all of your added services: 

apprise --body="Test Message" --tag=all \

                   --config=https://apprise.simonserver.lat/cfg/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
You may also create an Apprise configuration file that contains this line somewhere in it: 
include https://apprise.simonserver.lat/cfg/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
By leveraging the include directive, it will automatically be referenced for future calls to the apprise tool. All future calls using Apprise now simplify to: 
apprise --body="Test Message" --tag=all
Using CURL

The following command would cause the Apprise API to notify all of your services: 

curl -X POST \

                       -F "body=Test Message" \

                       -F "tags=all" \

                       https://apprise.simonserver.lat/notify/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
When sending attachments, curl requires all local files be prefixed with @. You can an add attachment like this: 
curl -X POST \

                  -F "tags=all" \

                  -F "body=Test Message" \

                  -F attach=@Screenshot-1.png \

                  https://apprise.simonserver.lat/notify/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
When sending more than one attachment, you must uniquely assign each attachment to a new ID. The example below leverages attach1 and attach2: 
curl -X POST \

                  -F "tags=all" \

                  -F "body=Test Message" \

                  -F attach1=@Screenshot-1.png \

                  -F attach2=@/my/path/to/Apprise.doc \

                  https://apprise.simonserver.lat/notify/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
Sends a notification to our endpoints with an attachment and no body specified: 
curl -X POST \

                   -F "tag=all" \ 

                   -F "attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png" \ 

                   https://apprise.simonserver.lat/notify/1d679df78d77bbddd16fd016cb1adea248f32ff4e5229f16ddae88b9598cc727
Configuration

Define your configuration below:

Apprise URL Builder build

Once you have successfully loaded at least one Apprise URL on the settings Configuration section, your loaded entries will display here.

Loaded Configuration

0 notification(s) selected for sending

  • Review the parsed destinations below before sending.
  • Select a tag (🏷️) on any entry to include it in announcement Notifications.
  • Use send to run a quick test and inspect the full debug output for that entry.
  • Need more destinations? Add or update them in settings Configuration.
Notifications
You can send a notification using the loaded configuration:
No Notification Targets Selected
Choose one or more tags from the Tags dropdown, select target entries from the web Review section, or add more entries in the settings Configuration section.
Clear Form restore_page